Acoustic drop ceilings in Lafayette, LA are ceilings that are installed below the structural ceiling and serve many purposes. The most obvious purpose is to improve the acoustics of the space, whether that space is a restaurant, theater, or classroom. They can also hide HVAC and other equipment behind the tiles that is easy to access by simply removing said tile. Acoustic ceiling tiles in Lafayette, LA meet their objective of improving acoustics by absorbing sound and reducing echoes, which helps prevent sound from traveling to adjacent spaces. They’re installed using a suspension grid system with the tiles resting above the grid.
Acoustic ceiling tiles in Lafayette, LA should be removed from their packaging at least 24 hours prior to installation. They should not be held in areas with temperatures below 60 degrees or exceeding 80 degrees, and low humidity is paramount. If needed, a dehumidifier can be used to prevent the panels from being exposed to excess moisture. Designing the grid system is a crucial part of prepping for installing an acoustic drop ceiling in Lafayette, LA. It is similar to installing tile flooring. You want to get the center in the correct spot so that the ceiling is symmetrical.
Before installing the L-Channel on the walls, make sure you are certain how far down you wish your drop ceiling to be installed. Once that is determined, measure around the perimeter of space from the floor and up. Mark the location of the studs so that the L-channel can be secured through the studs.
The main T-channel should run perpendicular to the floor-joists of the space. Refer to your grid layout to determine how far away from the wall your T-channel should go. The T-channel is supported on both ends by the L-channel and further in the center wires every so often, typically 2-4 feet apart.
4-foot cross Ts are simple to install and simply snap into place. After all the Ts are installed, it is simple to just drop the acoustic ceiling tiles into place.